Adjustable Tie‑Down Points
Slide the mounting hardware along the T-slots to position straps and accessories where you need them.
Secure Your Cargo
Attach straps or bungee cords to the anchor rings to help keep your cargo in place.
Durable Aluminum
A sturdy aluminum platform built for everyday cargo and outdoor gear.
KIT COMPONENTS
Installation Guide
-
Apply Protective Pads
-
Attach the Clamps
-
Position on the Rack
-
Tighten the Clamps
-
Tighten the Locknuts
-
Final Check
Apply the pads to the underside contact points to help protect your rear rack from scratches.
Fit the four clamps into the underside slots. Leave them loose for adjustment.
Center the platform on your rear rack and position the clamps beneath the rack rails.
Hold each clamp in position and tighten the knob to secure the platform to your rear rack.
Tighten the upper locknuts against the platform, then check that all four clamps are secure.
Check that the platform is centered and firmly secured, with no movement before loading.
Dimensions & Fit
Check the dimensions below to ensure a proper fit with your rear rack.
Requires an existing rear rack. Cannot be used on its own.
Rear Rack Compatibility
✓ Width 2.5″–7.6″ · Suggested thickness 0.35″–0.60″
Check your rear rack dimensions and add spacers where shown if needed.
FAQs
No. Velzen Deck XL mounts to an existing compatible rear rack.
It fits bikes with a flat, regularly shaped rear rack measuring 2.5–7.6 in (64–192 mm) wide. The recommended rack thickness is 0.35–0.60 in (9–15 mm).
Racks thinner than 0.35 in (9 mm) or 0.60–1.38 in (15–35 mm) thick require a separately sold Spacer Block.
Up to 25 kg / 55 lbs.
Do not exceed your bike or rear rack’s load limit.
14.41 × 8.57 × 0.79 in (366 × 218 × 20 mm).
The Velzen Deck XL includes one aluminum platform, four adjustable clamps, four anchor rings, mounting hardware and protective pads.
They reduce vibration and help protect your rear rack from scratches and paint damage.
Yes. The T-slot design supports DIY setups with baskets, boxes, pet carriers, straps, cargo nets and camping gear.
No. It is designed for cargo only.
You may need to purchase the Spacer Block for Rear Cargo Loading Platform separately. It helps level the platform and improves fit on uneven or irregular rear racks. Always confirm the platform is stable before riding.