Falcon A vs Falcon S vs Falcon X: Full Suspension eMTB Face-Off
When it comes to conquering rugged trails and embracing the thrill of electric mountain biking, choosing the right full suspension emtb can make all the difference.
With models like the Falcon A, Falcon S, and Falcon X from CYKE’s Cross Series in competition for your attention, how do you know which one is right for you? Each eMTB boasts unique features, cutting-edge technology, and performance capabilities designed to enhance your riding experience on rugged terrains.
In this guide, we’ll walk you through what makes each model special. You’ll see how they stack up in terms of ride feel, performance, and value.
Let’s take a closer look and find the right eMTB for your next adventure.
Design & Frame
The Falcon A, S, and X all use strong aluminum alloy frames and softail emtb structure. However, each one is shaped a little differently to match different types of riders.
Falcon A
Falcon A has a four-bar rear shock and an adjustable front suspension with 150 mm of travel. It’s built tough using a hydroforming process and finished with five protective layers. The welds are clean and polished for a strong, sleek look. This one’s made to handle off-road riding with comfort and durability.
Falcon S
The Cyke Falcon S shares the same 150 mm travel suspension but steps it up with a larger 29″ wheelset for better control and rolling power on mixed terrain. The frame construction includes Italian flat welding and hydraulic shaping, topped off with a baked-on finish. It feels solid and well-balanced. The clean welds and strong structure give it a sleek, modern look with serious strength underneath.
Falcon X
This one’s built for the toughest conditions. It has a soft-tail rear and a front fork with 80 to 120mm of travel. The frame is reinforced with flat welds and uses the same advanced shaping and coating methods as the others.
But what really sets it apart is the 26x4.8" Maxxis snow tires. These fat tires give it amazing grip on loose surfaces like sand, snow, or mud. If you like riding on wild, uneven ground, the Cyke Falcon X is built for you.
Motor & Power
Power is where these eMTBs shine, thanks to their BAFANG mid-drive motors.
The Cyke Falcon A packs a 500W motor that peaks at 750W, with 130Nm of torque. It’s plenty powerful for climbing hills and zipping along trails at up to 28 mph. Because it’s a mid-drive, the power feels balanced and smooth. You stay in control, even on uneven ground. The 9-speed cassette helps you shift easily, no matter the terrain.
The Falcon S and Falcon X step it up with 1000W motors that peak at 1100W, plus a huge 160Nm of torque. That extra power makes a big difference on steep climbs and rough trails. Like the Falcon A, they also top out at 28 mph, but with way more force behind them.
The Falcon S and Falcon X have the edge in raw power, but the Falcon A’s efficiency makes it great for longer rides. Plus, all three use torque sensors for smooth, responsive acceleration, so you feel connected to the eBike.
Battery & Range
The Falcon A has a 48V/15Ah (720Wh) lithium-ion battery with LG cells, offering up to 75 miles of range. Its 500W motor power helps stretch this distance, perfect for extended trail sessions.
On the other side, both the Falcon S and Falcon X use a 48V/20Ah (960Wh) battery. With the extra motor power, they offer around 65 miles per charge.
So if distance is your main goal, the Falcon A gives you more miles. But if you want more speed and power, the Falcon S and Falcon X give you that, even if it means a bit less range.
Drivetrain & Components
All three Falcon eMTBs use the same reliable SRAM 9-speed system. That includes an SL-X5 shifter, RD-X5 derailleur, and CS-PG-950 cassette. This setup ensures smooth, precise shifting across various terrains.
Braking is handled by TEKTRO HD-E730 hydraulic disc brakes with large 203mm rotors. You also get a 4-piston front caliper and a power cut-off sensor. That means stronger braking and better control, especially when riding hard or on steep trails.
For comfort, each electric mountain bike comes with a VELO saddle, aluminum seat post, flat bar handlebar, and soft VELO trail grips. It’s a solid setup that feels good, even on longer or rougher rides.
Display & Electronics
All three Falcon models come with a bright, easy-to-read BAFANG display. It’s a 4-inch color TFT screen with an IP66 rating, so it stays clear in sunlight and holds up against dust and water.
The Falcon S and Falcon X go a step further with Bluetooth, that you can connect to the CYKE app to track your rides, check stats, and adjust settings right from your phone. It adds a smart, personal touch to every ride.
No matter which model you choose, you will get 5 levels of pedal assist and a thumb throttle for quick bursts of speed. The controls are simple and easy to use, so you can focus on the trail, not the tech.
Ride Experience
Falcon A is the lightest of the three, weighing just 55 pounds. It’s quick and nimble, great for rough trails and sharp turns. The 27.5" tires add to that quick handling. With 150mm RockShox suspension, it absorbs bumps well, so even long rides feel smooth and comfortable.
Heavier at 77 pounds, but the Falcon S strikes a good balance between power and control. The big 29" wheels roll easily over mixed terrain. You still get 150mm of suspension, which helps with stability, especially at speed. The stronger motor also makes uphill climbs feel effortless.
The Falcon X is the tank of the trio. Heaviest (82.7 lbs) yet designed for snow, mud, and rough terrain. It has a special RST fork that’s tuned for deep and soft terrain. The fat 26x4.8" tires and full suspension make it feel stable and plush, even when you're riding over rocks or down steep slopes. Its weight can make it less nimble than the A or S, but it’s rock-solid when the trail gets rough.
However, all three eMTBs use torque sensors for smooth power delivery, so you’ll feel in sync with the trail.
Pricing & Value
Price always plays a big role when choosing a full suspension emtb. The Falcon A starts at $3,199, offering great value for its range and lightweight design. The Falcon S and Falcon X are both priced at $3,399. You’re paying a bit more for their bigger motors and upgraded components. The Falcon X’s snow tires and the Falcon S’s versatile tires justify the slight price bump.
Additionally, all come with a lifetime frame warranty, a 2-year parts warranty, and free shipping, adding to their appeal. Compared to competitors costing $4,000–$7,000, these eMTBs deliver premium features at a budget-friendly price.
FAQ
What’s the main difference between Falcon A, S, and X?
The Falcon A is the lightest with the longest range (75 miles), ideal for agile, long-distance rides. The Falcon S balances power and handling with 65 miles of range and 29" tires. The Falcon X is built for extreme terrains with 26x4.8" snow tires and a 1000W motor power, perfect for rugged adventures.
Can I upgrade parts like the chainring or tires later?
Yes, you can upgrade parts like the chainring or tires. Check out this helpful video for tips on upgrading your eMTB.
Which model should I choose if I’m new to eMTBs?
The Falcon A is the best choice for beginners. Its lighter weight, longer range, and agile handling make it easier to control while you learn the basics of eMTB riding.
Why does the Falcon A have a longer battery range than the Falcon S and X?
The Falcon A has a bit less motor power, 750W at its peak, compared to the 1000W+ motors on the Falcon S and Falcon X. But that also means it uses less battery power while you ride. So, under similar conditions, you will get more range out of the Falcon A.
Conclusion
The Falcon A is perfect for beginners or those who love long, agile rides. The Falcon S offers a great mix of power and versatility for mixed terrains. The Falcon X is your go-to for extreme adventures like snow or sand.
No matter what model you pick, you get a full suspension emtb with top-notch components and performance at a price that won’t break the bank. Choose based on where you ride, how much range you need, and how much weight you want to carry.
